How to Make Shoes Not Slip Off Heel: 10 Simple Hacks

Last updated on August 11th, 2024 at 09:17 pm

Have you ever fallen due to slipping off a shoe? slipping shoes is more than an inconvenience because it can cause serious injury to anyone. Here is how to make shoes not slip off heel 10 simple hacks for this.

Generally, everyone has one to two pairs of shoes, but after some time the bottom part wears off, due to which the shoe becomes slippery. On the other hand, some shoes already come out with smooth soles, such as formal shoes or sandals for girls.

It becomes very risky to go outside wearing such slippery shoes. A little carelessness can lead to major accidents.

Now different weather conditions also increase the risk of slipping. It gets worse in the rain and snow, even for a new shoe.

You May Read: Can You Wear Leather Shoes in the Rain?

According to a report by Researchgate, more than 70,000 people in Finland are injured every year by slipping shoes. Simply because the roads are covered with snow.

If you have ever faced this type of problem with your shoes, don’t think that you are alone. Because 8 out of every 10 people are facing it and most of them ignore it, you should not do that.

When we walk in shoes, there is friction between the sole and the floor, and water and ice prevent friction from happening properly, so we slip. The simple solution is we’ll add something so that friction works smoothly.

---

Why the Heels of My Shoes are so Smooth

Here you need to know that the shoe does not slip only from the outside but also the inside. When this happens from the inside, then it becomes very difficult to walk, as well as there is a danger of sprain in the feet.

Sole Selection is a Must

The biggest mistake we ever do is not checking the sole properly before buying. What happens is after six months or a year the sole gradually deteriorates due to friction.

The bottom of the shoe becomes smooth enough so that it starts slipping on the tiny water droplets.

---

Save the Sole from Chemicals

Most of the soles are made up of hard rubber or polyurethane material that is completely water-repellent. However some chemicals like acids, basic solutions, or other home cleaning products easily damage the soles.

Now when we walk, the shoe becomes smooth by rubbing on the damaged part. Make sure to avoid keeping shoes in contact with these kinds of chemicals.

---

Fungi Spores

Due to the moisture, there is a risk of the growth of fungus on the soles. It boosts the disintegration process in the sole.

It happens because moisture remains on the sole for a long time. And when the temperature rises to some extent white patches are noticed.

The best weather for these fungi spores is cloudy weather. So, special treatment is needed for your shoe in stormy weather to remove fungi spores from shoes.

---

Why Should I Fix Slipping of Shoes

It can never be said when what accident will happen. After wearing such shoe

• There is a high risk of slipping on the sand and watery surface.
• If the shoe size is a bit big then the feet slip from the inside. It can cause a severe sprain in your feet while walking.
• Now by wearing such a shoe, you will always have the risk of falling, then important work can get obstructed.
• Whenever the bottom part of the shoe wears, it doesn’t wear evenly from everywhere, which is bad to see.

---

How to Make Shoes Not Slip Off Heel

Because this is a serious problem, all the methods I will tell you about here are temporary. However, some of them are long-lasting.

If The Shoe is Slipping from the Outside

Emery Paper Technique

The best quality of emery paper is that it makes a rough surface smooth and smooth surface rough. It is effective in making the sole of the shoe rough so that the shoe does not slip.

When we walk, the heel and ankle part of the shoe touches the ground the most and is most responsible for slipping. So, that is the area where you should apply this method.

Take a clean brush clean the bottom of the shoe and remove mud, dust, and debris. With 250-grit emery paper rub the bottom, especially the ankle and hell part. Now slowly cover the toe area also for the safe side.

After four to five minutes of rubbing when you touch it, you can feel the area becomes rough. Along with this, if the bottom of the shoe is worn out unevenly, then with its help it also gets cured.

Drawbacks:

• Always keep in mind, this is not a permanent solution, after a few days the shoe becomes like it was before.

---

Band Aid

If you have ever used a band-aid, then you must have seen that the upper part of it is rough. By using this, we can reduce the slipping of shoes.

Take two or three band-aids and stick them onto the bottom of the shoe in different areas. Now walk around wearing the shoe to check its effectiveness.

Benefits:

• Low cost.
• Easy to do.

Drawbacks:

• The band-aid comes out due to the water after one or two uses.
• May be not comfortable while walking due to extra padding.

---

File Tools

The file is a mechanical tool used to smoothen the metal surface and is far better than emery paper. It can be used to make the shoe bottom rough but with some precautions.

Take a smooth-cut file tool and rub it on the sole of the shoe. Start rubbing from the outer side to the inner side gradually.

Keep in mind it is mainly used to smooth metals so do not rub it on the shoe for more than 20 to 30 seconds. Also when you are using it make sure to use gloves to save your hand.

Benefits:

• It lasts up to 10 to 20 days.
• Easy process to do.

Drawbacks:

• It is not worth buying this tool just for shoes. If you already have then that’s fine.
• After doing the process 10 to 15 times the sole becomes thin so there is a chance of peeling.

---

Make Patterns

This is an effective way for shoes and lasts more than a month or two easily. Here you need to make zig-zag patterns on the sole if the existing patterns are not visible.

Take a sharp object like a kitchen knife and warm it up to 200 degrees Celsius and from a safe distance draw the zig-zag pattern on the sole. But make sure to wear protective hand gloves before you start.

Remember whenever you are making those patterns, at the same time keep pouring little water over the pattern. So that the surrounding part does not burn.

Benefits:

• Most effective method of all.
• Lasts more than a year.

Drawbacks:

• A single mistake can burn the sole.
• Also do it with a proper mask because, after burning soles, gas is released which can harm you.

---

Transparent Adhesive

The thin adhesive that we normally use to stick paper, can be used to prevent the shoe from slipping. Just have to take care of the quantity because then it can be difficult to walk.

Wash the bottom of the shoe thoroughly with water and then dry it properly in the sunlight. Now put two or three drops from the adhesive tube and spread it well with a spatula.

Keep in mind that the layer should be thinner as much as possible. Now leave it for three to four hours and you can check it by wearing it.

Benefits:

• Low Cost
• Easy to do the process.

Drawbacks:

• Sticky adhesive becomes very difficult to remove later.

---

Cotton Threads

Cotton thread is very good at absorbing liquid, and it slips very less. But at the same time, this process takes a long time and tests your patience level.

If the sole patterns are completely invisible then this method will work better.

First, clean the sole of the shoe thoroughly and take 1.5 mm cotton thread and cut small pieces of it according to the shoe sole measurement. Remember, we will stick it in the same pattern as was found on the sole before.

Now with the help of adhesive, start sticking each thread according to the pattern. Take such an adhesive that will stick firmly after drying.

Benefits:

• In formal shoes performing this method is quite easy.
• This works very well.

Drawbacks:

• Time-taking method to perform.
• After a couple of uses the threads are damaged due to the friction and then you need to replace that with new ones.

---

Non-Slip Shoe Pads

Non slip pads are the straight solution for this problem, simply buy and stick it. These are made up of rubber materials, the same material your shoe sole is made from.

Remove the protective film from the pad and simply stick it on the sole between the toe and heel area. Keep in mind whenever you are purchasing it check the compatibility with your shoes.

Benefits:

• Simply buy and stick, so easy.
• Long-lasting.

Drawbacks:

• Costly.

---

If the Shoe is Slipping from the Inside

Avoid Wearing Loose Shoes

It really makes sense that you must avoid wearing loose shoes. Because wearing loose shoes causes a lot of sweating and due to which the feet slip from inside.

Now, since the feet are not getting grip properly from the inside, if the sole is smooth from the outside as well, then the risk of slipping increases further.

So, always buy a shoe that perfectly fits your feet, and you feel comfortable wearing it.

---

Cotton Pads

If the shoe is a little bit loose, then you need to fill those free spaces with material like cotton pads or sponge. However, cotton pads are far better.

Take an old cotton dress material and cut it according to the size of the insole. Cut three to four layers of it and stitch them together.

Please remember that you need first to look over, how many layers of cotton fabric layers you put, in so the shoe fits you.

By doing this, the sweat that is formed inside your shoes will be absorbed by this pad, due to which it will slip less, and the bad smell reduced. Now do not forget to change the pad every day.

Benefits:

• One of the best solutions.
• Pocket friendly.

Drawbacks:

• It may irritate you while walking.

---

Insole Grips

The insole grips are specially designed to keep the feet in the correct position inside the shoe. Because of this, the slipping of the feet is greatly reduced.

It is to be very good for those who use sports shoes. You can buy it from any local or online marketplace and simply keep it inside the shoe, but make sure to remove the old insole first.

Benefits:

• Largely available for any type of shoe.
• Easy to do.

Drawbacks:

• Due to its rough surface, you may not feel comfortable, however, it has its own advantage.
• Costly.

---

Final Thoughts on How to Make Shoes not Slip Off Heel

There are many types of shoes. Nowadays safety shoes are very famous for giving protection to your feet. But it cannot save you from slipping as well.

It is obvious and normal that if you buy any shoe, after some months or years of use the sole gets deteriorates and is smooth. which leads to slippery shoes.

Precaution is necessary so that when you go out somewhere wearing shoes, then there is no fear in your mind that you might fall somewhere.

Along with this, wearing the right-fitting shoe also reduces this issue to a great extent. But if you already have the issue then you can try out the above easy methods.

Make sure you comment down below your views and suggestions about this article. It gives us the motivation to do more for you guys.

Thanks For Reading…….

---

FAQs on How to Make Shoes Not Slip Off Heel